Cheap Oil Change in Reno, NV

Our Oil Change Process

When you call us for an oil change, here's what we take care of:

• Change the Oil: We'll drain the old oil and replace it with the recommended type for your vehicle—whether synthetic, conventional, or diesel-specific.
• Replace the Oil Filter: Out with the old, in with the new. We replace the oil filter and ensure it's properly disposed of.
• Inspect Other Filters: While we're at it, we also check other filters, such as the air and cabin filters, to make sure everything is in good shape.
• Top Up Fluids: We top off other essential fluids—coolant, brake fluid, windshield washer, you name it.

Changing your oil may seem simple, but it's vital to keeping your engine running smoothly. Neglecting this can lead to serious issues and costly repairs.

Why Is Oil So Important?

Oil is the lifeblood of your engine. It lubricates, cools, and keeps everything moving smoothly. But over time, engine oil gets worn down and contaminated by small particles, which means it loses its ability to protect your engine.

Why Does Oil Break Down?

Over time, oil is exposed to heat, air, and moisture, which causes it to degrade. It becomes thick and sludgy—too thick to circulate effectively. When oil can't flow, your engine's moving parts lose the lubrication they need, leading to wear and tear.

How Oil Moves Through Your Engine

• Oil Pan: This is where your oil rests when the engine is off, waiting to be pumped.
• Oil Pump: The oil pump creates the pressure needed to circulate oil through the engine. If the pump fails, the oil can't move, and your engine will quickly overheat.
• Oil Filter: The filter catches harmful deposits and tiny metal particles that can damage your engine. We replace it with every oil change to keep your oil clean.

How to Check Your Oil Level Yourself

Checking your oil regularly is a great habit to keep your engine healthy. Here's a step-by-step guide:

• Park on a Level Surface: Always park on a flat surface to get an accurate reading.
• Let the Engine Cool: Wait until your engine cools down before checking. Oil expands when hot, which can give you a false reading.
• Remove and Wipe the Dipstick: Pull out the dipstick, wipe it clean with a cloth or paper towel, then insert it back in fully.
• Check the Oil Level: Remove the dipstick and hold it horizontally. Look at the level against the dipstick's markings—a minimum and maximum mark shows the safe range.
• Check the Oil Condition: Is the oil clear, or does it look milky or dirty? If it's white and creamy, that could mean moisture is in the oil, which needs to be addressed immediately.
• Add Oil if Needed: If the oil level is low, unscrew the oil filler cap (usually labeled "Engine Oil") and add a little oil at a time, checking the dipstick to ensure you don't overfill.
• Secure the Oil Cap: Once topped up, screw the cap back on tightly. If you notice the oil was low, consider your last oil change. It might be time to get it done if it's been a while.